top of page

Fire Safety Considerations When Using Shipping Containers for Storage

Nov 6
7 min read

Shipping containers can provide secure, convenient storage for tools, equipment, stock and materials, but their robust steel construction does not remove the need to think about fire safety.

 

What you store, where the container is positioned and what happens around it can all affect the level of risk. A container holding landscaping tools, for example, presents very different considerations from one containing fuels, chemicals or battery-powered equipment.

 

For businesses, shipping container storage should therefore form part of the wider fire risk assessment for the site rather than being treated as an isolated storage area. In England and Wales, people responsible for non-domestic premises must assess fire risks, put appropriate precautions in place and keep their assessment under review.

 

A steel shipping container is not automatically fireproof

 

Shipping containers are primarily designed to protect cargo during transport. Their steel structure is strong and durable, but a standard shipping container should not be treated as a purpose-built fire-resistant store.

 

Steel itself does not burn, but heat can still be transferred through the walls and roof. The contents of the container may also generate considerable heat, smoke or hazardous gases if they catch fire.

 

The flooring, seals and goods stored inside can also be combustible. For this reason, the fact that a container is made predominantly from steel should never be used as a substitute for assessing what is being stored and the potential consequences of a fire.

 

Start by considering what you intend to store

 

The contents of the container are one of the biggest factors affecting fire risk.

 

Many businesses use containers for relatively ordinary items such as tools, machinery, spare parts, furniture, packaged stock and building materials. Even within these categories, however, there may be combustible packaging, plastics, oils or other materials that could contribute to a fire.

 

Businesses should identify both potential fuel sources and potential ignition sources. Government fire-risk guidance highlights combustible materials alongside hazards such as electrical equipment, heating, smoking and contractors carrying out work.

 

Knowing exactly what is kept in the container also makes it easier to identify changes in risk. If a unit that previously stored tools begins to hold fuels or chemicals, for example, the existing fire precautions may no longer be suitable.

 

Be particularly careful with flammable liquids

 

Petrol, solvents, paints and other flammable liquids require considerably more thought than general stock or equipment.

 

The Dangerous Substances and Explosive Atmospheres Regulations 2002, commonly known as DSEAR, require employers to assess and control risks created by dangerous substances in the workplace. HSE guidance makes clear that flammable-liquid storage needs appropriate precautions to reduce the likelihood and consequences of fire or explosion.

 

A standard shipping container should therefore not simply be assumed to be suitable for storing significant quantities of flammable liquids.

 

Depending on the substances and quantities involved, requirements can include suitable ventilation, spill containment, segregation from incompatible materials, control of ignition sources and specialist fire-resistant storage arrangements.

 

If you intend to store fuels, solvents or other hazardous substances, obtain appropriate fire-safety and DSEAR advice before deciding what type of storage is required.

 

Gas cylinders need specific consideration too

 

Compressed gas cylinders can create significant risks in a fire and may require different storage arrangements from ordinary equipment.

 

The appropriate solution depends on the type of gas, quantity, cylinder condition and how the cylinders are used. Ventilation and separation from ignition sources can be particularly important.

 

Rather than placing cylinders inside a closed standard container simply for security, businesses should follow the relevant guidance for the gases they use and incorporate them into their risk assessment.

 

Where specialist gas storage is required, a purpose-designed solution may be more appropriate than a conventional shipping container.

 

Think carefully about batteries and charging equipment

 

Battery-powered tools, machinery and equipment are now common in many industries, from construction and landscaping to warehousing and maintenance.

 

Simply storing equipment containing batteries is not necessarily the same risk as charging it, but charging introduces an electrical source and can create additional hazards, particularly if batteries are damaged, incompatible with the charger or left unattended.

 

If equipment is charged inside a container, this should be specifically considered within the fire risk assessment.

 

Electrical installations should be suitable for the environment and installed and maintained by competent people. Avoid improvised extension leads or overloaded sockets, and follow the equipment manufacturer's charging and storage instructions.

 

For businesses storing significant numbers of lithium-ion batteries, specialist fire-safety advice may be appropriate.

 

Keep ignition sources away from combustible materials

 

Good housekeeping is one of the simplest ways to reduce fire risk.

 

Avoid allowing combustible packaging, waste, oily rags and unnecessary materials to accumulate inside or immediately around a storage container.

 

Hot work such as welding, grinding or cutting should also be carefully controlled. Sparks and hot fragments can travel further than expected and ignite nearby combustible materials.

 

The principle is straightforward: where possible, separate things that could start a fire from things that could fuel one. Current government fire-risk guidance specifically recommends keeping ignition sources away from fuel sources.

 

Container location matters

 

Where you position a storage container can affect both the likelihood of a fire spreading and the ability to deal with an emergency.

 

A container placed immediately beside a building, combustible boundary, waste storage area or another high-risk activity may present a different level of risk from one in an open section of a commercial yard.

 

There is no single separation distance that is suitable for every business and every type of stored material. The correct arrangement needs to reflect the contents of the container, surrounding premises and findings of the site's fire risk assessment.

 

The location should also avoid obstructing escape routes, fire exits or routes that emergency services may need to use.

 

Keep access around the container clear

 

The area immediately around the doors should remain accessible.

 

Leaving pallets, waste, equipment or vehicles directly in front of a container can make it harder to access its contents and could create additional combustible material close to the doors.

 

Clear access also becomes important if emergency services need to reach the container.

 

Vegetation should be managed too, particularly around containers located on yards, farms, landscaping sites or other areas where long grass and dry vegetation may develop around the unit.

 

Don't block escape routes with stored goods

 

If a container is positioned close to a workplace, it should not compromise existing emergency arrangements.

 

Businesses carrying out fire risk assessments must consider emergency routes and exits, as well as how people will safely evacuate if a fire occurs.

 

This is especially important where several containers are installed in a yard. Their positioning should not create narrow dead ends, prevent gates opening or reduce access to an established escape route.

 

Think about the entire site layout rather than viewing each container individually.

 

Consider how the container will be used day to day

 

A container that is opened briefly to retrieve equipment presents different considerations from one in which employees regularly spend time sorting stock or carrying out work.

 

If people routinely work inside the container, your risk assessment needs to account for their ability to escape and any activities being carried out there.

 

The original cargo doors are wide when fully open, but they are heavy and should be maintained so that they continue to operate correctly.

 

If the container is being used for anything beyond straightforward storage, additional health, safety and building requirements may also become relevant.

 

Maintain the doors and locking equipment

 

Container doors are central to security, but they also need to remain easy to operate.

 

Hinges, locking bars and handles should be checked periodically for excessive corrosion, damage or stiffness. A container sitting on uneven ground can also twist slightly, which may make its doors increasingly difficult to open.

 

If someone needs rapid access to a container during an emergency, badly seized doors can create an unnecessary problem.

 

Regular maintenance and correct siting on firm, level ground can help prevent many common door issues.

 

Check electrical installations

 

Standard shipping containers do not normally require electricity simply to function as storage units.

 

Where lighting, sockets, heaters or other electrical systems have been added, however, they introduce potential ignition sources that should be considered as part of the fire risk assessment.

 

Electrical work should be suitable for the environment and installed by an appropriately competent person. Equipment should then be maintained and inspected as required.

 

Portable heaters deserve particular care because placing a heat source close to cardboard, textiles, timber or other combustible stock can significantly increase the chance of fire.

 

Fire extinguishers should reflect the actual risk

 

It can be tempting to assume that placing an extinguisher next to every storage container is automatically the correct approach.

 

Firefighting equipment should instead be selected as part of the site's overall fire-safety arrangements. The type, number and location required depend on the hazards present and the people who may be expected to use the equipment.

 

Government guidance requires responsible persons to consider whether firefighting equipment is needed as part of their fire risk assessment.

 

Where unusual or hazardous materials are stored, professional advice may be needed to establish the appropriate precautions.

 

Review your fire risk assessment when storage changes

 

Storage requirements rarely stay completely static.

 

Stock levels increase, new products arrive and different equipment may gradually find its way into a container. These changes can alter the fire risk without anyone deliberately changing the original storage arrangement.

 

Government guidance recommends reviewing the fire risk assessment when risks or hazards change, specifically highlighting significant changes in stock levels or the introduction of chemicals and dangerous substances as reasons for reassessment.

 

Periodic checks of container contents are therefore a sensible part of site management.

 

Standard containers and hazardous-material storage are not the same thing

 

Shipping containers are highly practical for many everyday storage requirements, but a standard container should not be confused with a purpose-designed hazardous-material or fire-resistant store.

 

Where dangerous substances are involved, additional controls may be necessary under DSEAR and other health and safety requirements. HSE provides specific guidance for the workplace storage of flammable liquids and recommends assessing storage arrangements according to the substances and quantities involved.

 

Businesses should establish these requirements before purchasing or hiring a container rather than trying to adapt an unsuitable storage arrangement afterwards.

 

Make fire safety part of your storage planning

 

Shipping containers can provide secure, robust and convenient storage for a wide range of business equipment and materials, but safe use starts with understanding what is going inside them.

 

Consider the contents, ignition sources, container position, surrounding activities and how people will access the unit. Keep the area tidy, maintain doors and any electrical equipment, and update your fire risk assessment when the way the container is used changes.

 

For ordinary tools, equipment and business stock, choosing the right container size and location can provide a practical on-site storage solution. If hazardous or highly flammable materials are involved, seek specialist advice to confirm what storage arrangements and fire precautions are required.

 

TEU Ltd supplies new and used shipping containers for sale and hire across Liverpool, Merseyside, Cheshire, Lancashire and the wider North West. Our team can help you choose a container for your general storage requirements and discuss the practical considerations around delivery and siting.

 
 
 

Comments


bottom of page