top of page

When Should You Choose a High Cube Container Over a Standard Container?

Nov 9
6 min read

Standard and high cube shipping containers are similar in most respects, but one difference can make a big impact: height.

 

A standard dry container is typically 8ft 6in high externally, while a high cube container is generally 9ft 6in high. That extra foot of height increases the usable internal space and can make a high cube container more suitable for bulky stock, tall equipment or storage systems that make greater use of vertical space.

 

However, bigger is not automatically better. A standard container may be more practical where site access is restricted, where the additional height is unnecessary or where the contents are dense rather than bulky.

 

Understanding how you will use the container is the best way to decide between the two.

 

What is a high cube shipping container?

 

A high cube container is essentially a taller version of a standard shipping container.

 

A standard 40ft dry container is normally around 8ft 6in high externally, while a 40ft high cube is around 9ft 6in. Internal height also increases from roughly 2.39 metres in a standard container to about 2.70 metres in a high cube, although precise dimensions can vary slightly between manufacturers.

 

The length and width remain broadly the same, so the main advantage is additional vertical storage capacity rather than a larger footprint.

 

For businesses trying to increase storage without using more ground space, that can be valuable.

 

How much extra storage space does a high cube provide?

 

The difference may only be around one foot in external height, but across the full length of a 40ft container that creates a noticeable increase in volume.

 

Maersk specifications show a typical 40ft standard container with approximately 67.7 cubic metres of capacity, compared with around 76.4 cubic metres for a 40ft high cube.

 

That is roughly 13% more internal volume without increasing the container's footprint.

 

For businesses storing bulky but relatively lightweight goods, this can allow considerably more stock to be kept in the same area of a yard or site.

 

Choose a high cube when your goods are tall

 

The most obvious reason to choose a high cube container is when the items you need to store are simply too tall for a standard unit. Machinery, equipment, large furniture, stacked materials and certain packaged products can all benefit from the additional clearance.

 

The door opening is taller as well. Published specifications for one common 40ft high cube design show a door height of around 2.58 metres, compared with around 2.27 metres for a standard 40ft unit.

 

That extra door clearance can be just as important as the internal height if you are moving large items into and out of the container.

 

High cubes can be useful when you want to maximise shelving

 

Extra height is also useful where the container will be fitted with shelving or racking by a third party. Rather than leaving unused space above stored items, the additional headroom can allow another level of shelving or taller storage arrangements.

 

For businesses storing boxed products, parts, tools or consumables, this can make better use of each square metre of ground space.

 

It is particularly valuable where yard space is limited but there is enough vertical clearance to accommodate a taller container.

 

Bulky stock often suits a high cube better than heavy stock

 

High cube containers are particularly useful where volume is the limiting factor. Furniture, packaging, textiles, insulation materials and other bulky goods may fill a standard container long before its weight capacity is reached.

 

A high cube allows more of this type of stock to be stored without moving to a second container. However, if you are storing very dense materials such as metal components, machinery or construction products, weight rather than volume may become the limiting factor.

 

In that situation, the extra height may provide little practical benefit.

 

A high cube does not necessarily carry more weight

 

It is important not to assume that the larger internal volume means a high cube can carry significantly heavier loads.

 

In fact, standard and high cube containers can have very similar payload limits. Maersk lists a typical maximum payload of around 28,870kg for a 40ft standard dry container and around 28,690kg for a 40ft high cube.

 

The high cube gives you more space, not necessarily more weight capacity. This makes it particularly suited to lighter goods that take up a lot of room.

 

Always check the markings on the individual container if weight capacity is important, as specifications vary.

 

Consider how goods will be loaded and unloaded

 

The additional height can improve accessibility for certain loads, but it can also change how the container is used. If goods are stacked higher, you may need appropriate handling equipment to reach them safely.

 

Forklifts, pallet handling equipment or suitable access systems may be required depending on what is being stored. It is worth thinking about the full loading process rather than simply asking how much can physically fit inside.

 

A high cube filled inefficiently may offer little advantage over a well-organised standard container.

 

Site clearance matters

 

The extra height also needs to be considered before delivery. A high cube container requires additional vertical clearance, which can be important where a site has overhead cables, tree branches, canopies or other restrictions.

 

Delivery itself can require even more clearance because the container may be raised during unloading. A location that comfortably accepts a standard container may not necessarily be suitable for a high cube.

 

Providing your container supplier with photographs and measurements before delivery can help identify any potential issues.

 

Think about access roads and delivery vehicles

 

The container dimensions are only one part of the delivery process. The vehicle carrying the container also needs enough space to enter the site, manoeuvre and unload safely.

 

If the site has narrow gates, low trees or overhead obstructions, these factors should be considered before choosing a taller unit.

 

For many commercial yards and industrial premises, this will not be a problem, but it is worth checking rather than assuming.

 

Standard containers are often enough for general storage

 

For everyday business storage, a standard container may provide all the space you need. Tools, building materials, boxed stock, machinery and general equipment can usually be accommodated comfortably without the extra height of a high cube.

 

If your goods do not need additional vertical clearance, choosing a standard unit may be simpler and could provide a wider choice of available containers.

 

The aim should be to choose the container that best matches the contents rather than automatically selecting the largest possible option.

 

High cubes can help when ground space is limited

 

One of the strongest arguments for a high cube is that it increases storage volume without increasing the container's footprint. A 40ft high cube occupies broadly the same ground area as a standard 40ft unit but offers substantially more internal volume.

 

For sites where additional yard space is difficult to find, making greater use of vertical space can be more practical than adding another container. This can be particularly useful for warehouses, construction sites, manufacturers and retailers that need temporary or overflow storage.

 

Check whether the extra height will actually be used

 

Before paying for additional capacity, think carefully about how you intend to organise the container. If most items will sit on the floor and cannot be safely stacked, much of the additional space may remain unused.

 

Similarly, if staff need to retrieve goods manually, storing items at greater heights may make access less convenient. The extra capacity of a high cube is most valuable when the contents and storage layout genuinely make use of it.

 

High cube or standard: which should you choose?

 

A high cube container is generally worth considering when you need more vertical clearance, want to maximise shelving or racking, or are storing large quantities of bulky but relatively lightweight goods.

 

A standard container is likely to be sufficient where your items fit comfortably within normal dimensions and extra height would provide little practical benefit.

 

Site access, delivery clearance, weight requirements and how frequently you need to reach stored goods should all influence the decision.

 

If you are unsure which container type is most appropriate, discussing the dimensions and intended contents with your supplier before ordering can help avoid paying for capacity you do not need.

 

TEU Ltd supplies shipping containers for businesses and individuals across Liverpool, Merseyside, Cheshire, Lancashire and the wider North West. If you are looking for additional storage, our team can advise on available container sizes, condition and the practical requirements for delivery to your site.

 

 

 

 

 

 

 
 
 

Comments


bottom of page